Metal Roof Restorations

General Roofing Systems Canada provides Roof Restorations throughout Canada. Roof Restorations are completed in the following cities: Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

A metal roof restoration is a less expensive alternative than having a roof replacement completed.

Roof Coating – Liquid Rubber Solutions

Leaking Metal Roof Systems

A metal roof on a residential project may or may not be installed on a high slope. If installed on a high slope, it is less likely to leak However, many industrial and commercial roof systems are low slope. If a metal roof is installed on a low slope, chances are leaks will occur.

Why does Metal Roofing Leak?

Metal roofing expands and contracts with changing weather conditions, which causes the roof fastener holes to get larger over time. This is especially true in our unpredictable Western Canadian climate. Expansion and contraction of the metal causes the seams to expand and contract which can cause leaking as the seams  become less crimped or locked over time. Ice damming and snow loads can also cause metal roofing to leak. Ice damming can even back up at the eave of a metal roof,  especially if there is a gutter system that is frozen solid. Ice damming can move roof vents or various roof openings enough to cause a leak. Snow loads can weigh down metal roofing so much that seams become more exposed. Caulking of roof vents and roof openings become brittle and crack over time which can also cause leaks.

SG1S1511
Metal Roofing – Ice Damming at Eave

Metal roofing will also trap moisture on the underside, causing condensation that will eventually result in a roof leak.

Metal roofing is a watershed product,  not to be mistaken as a waterproofing product. Waterproofing is a completely different discipline in roofing. Metal systems are inherently designed to be secure yet will eventually leak.

SG1S1524
Metal Roofing – Roof Ice Damming Leaks

Metal roofing is one of the best roofing systems you can purchase in the world. It will outlast most other roofing surfaces. However, there are some exceptions that will last longer, such as: slate roofing, rubber roofing, concrete tiles, synthetic tiles. Nonetheless, a metal roof is undeniably one of the longest lasting roofing materials in the world.

What separates a roof that lasts fifty years and a roof that lasts twenty years is the quality of roofing material, the metal roofer’s installation specifications, and proper maintenance of the roof over the years.

metal roof 7 (2)
Metal Roofing – Installation is Key

Quality metal roofing costs more than the less expensive versions.  A lower quality, less expensive metal roof may only last fifteen or twenty years. whereas a metal roof that is installed using a higher quality will last fifty years. In either instance, if the metal roof is installed poorly, a fifty year metal roof may only last a year.

A metal roof installation needs to be precise and needs to allow for the fact that it  is a watershed and not waterproofing material. By its nature, a metal roof  watersheds, therefore it is expected to eventually leak. Whether that leak will affect you is determined by a number of variables such as hidden fasteners that provide more protection than exposed fasteners, using locking panels, using a steep versus a low-slope system, and a premium roof underlay beneath the metal roofing material.

Edmonton, AB Rooftop Snow Removal
Metal Roof Maintenance

Replacement, Repair, or Restoration. What’s the Answer?

There are a number of ways to avoid the problem prior to needing to replace a metal roof. We won’t go in to those ways in this article, as this article is to assist those wanting to explore avenues of metal roof restoration, repair, or replacement.

General Roofing Systems will typically suggest a few answers to your metal roof leak problems:

Maintenance
Maintenance should be conducted on an annual basis. Caulking made for metal roofing is available and should be re-done every fall. Be sure gutters are kept clear during the winter. DO NOT let your gutters freeze up as this will cause problems with your metal roof. Also, snow loads are important; try your best to maintain a reasonable amount of snow on your roof. If possible, keep the snow off.

Repair
Repairs usually involve maintenance such as caulking, replacement of vents or some form of sheet metal fabrication for a detail on the metal roof. If the roof leak and subsequent repair isn’t focused to a specific issue, but is more of an intermittent leak issue, then you are likely best looking at a metal roof coating or a metal roof replacement.

100_0086
Roof Coating – Liquid Rubber Technology

Coating
Coatings were once looked at as a short term solution.

New coating technology is extremely successful, long lasting, consistent, and has finally solved the roof expansion and contraction problem.

Liquid rubber polyether roof coating technologies are solvent free, maintain 900% elongation, UV resistant, bond to almost any construction or substrate, liquid cold applied, elastomeric, great for green roof applications, 100% solids and will not shrink, they are compliant with all known environmental requirements, resistant to thermal shock and slumping at high temperatures.

The first benefit of coating a metal roof vs. replacing your roof: Metal roof repair, or coatings, are considered maintenance and as a result are a tax deduction.

The second benefit of metal roof coating in today’s market is that the new liquid rubber coatings are highly effective, even more so than most new metal roof systems. The new liquid rubber coatings are highly advanced (developed as a result of nanotechnology) and the elongation values are in the order of 900% and are UV resistant. The roof coatings move with the expansion and contraction of the metal roof and keeping it waterproof.

The third benefit of the new metal roof coatings is that a roof coating will cost you about 1/3 to 1/2 the price that a new roof replacement would.

The final benefit to coof coatings worth mentioning is that the new liquid rubber polyether technology last several years.  We have a ten year warranty with an option to extend to twenty years in some instances (requiring a maintenance coat at 10 years typically).

Until next time,

The Team at GRS

 

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com.

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Metal, Membranes, and Roof Shingles for Low-Slope Systems

General Roofing Systems Canada installs IKO shingles throughout Canada. Installations are completed in the following cities: Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Edmonton Flat Roofing Repair

When completing low slope re-roofing systems it is important to take into consideration the correct election of material that adheres to the local building codes and material manufacturer’s specifications.
Below we have provided a guideline for low slope shingles, roof membranes of flat roofs, and metal roofing.

Low Slope Roofing Shingles

Serious thought is required when you are considering re-roofing a roof that has a slope that is less than a 4/12 pitch. Malarkey Roofing

For roofing with a 3/12 pitch regular shingles can usually be installed with 2 ply 15 lb roofing felt paper as underlay ( Be sure to check with your specific building code and the shingle manufacturer).

The General Roofing Systems Canada (GRS) specification for how to install roofing shingles is to never use felt paper. We prefer to use Ice & Water protection on eaves, valleys, and around chimney flashing.  In addition to Ice & Water,  we also use a  synthetic roof underlay such as titanium.

A roof that has a 2/12 – 3/12 slope is more tentative and the risk for leaks increases. Some shingle manufacturers such as IKO with the Cambridge shingle will warranty their shingles on a low slope roof for twelve years. Malarkey shingles will honour a 30 year warranty on low-slope roofing.

A roof that is 2/12 or less in slope should have a “flat roof” or traditional “low slope membrane” installed. We like to see any roof that is less than a 4/12 slope get a low slope membrane that is fully adhered, mechanically fastened, or ballasted.

Other information:

IKO Shingles

IKO Low Slope Shingle Bulletin – Installation of Asphalt Shingles on Low Sloped Roofs

IKO Roofing – Applying Asphalt Shingles on Low Slopes (covers 3 tab shingles, eave protection, etc.)

Low Slope Roof Membranes (Flat Roofing)

General Roofing Systems Canada (GRS) Edmonton Flat Roofers

Low slope membranes for flat roofing come in a few categories;

  1. Single Ply Membrane: Single ply membranes come in the form of EPDM (rubber), TPO (Thermal Plastic), or PVC (Poly Vinyl). Single membranes are either fully adhered, mechanically fastened, or ballasted.
  2. Two Ply Membrane: The primary two ply membrane is the SBS Modified Bitumen that can be torched down or cold applied.

  3. Built up Roofing: Built up roofing is another way of describing multi-layer roofing. An example would be the traditional  roofs tops that are commonly referred to as tar and gravel roofs or flat-top tar roofs.

  4. New Built up Roofing: More recently, modern technologies have advanced the built up roof and newer built up flat roof systems. They now utilize environmentally friendly products and modifiers vs. the tar or bitumen that has been more commonly used in tar roof systems. The newer versions of built up roof systems are extremely tough and will outlast almost any other roof. They are VOC free, making them perfect sustainable offerings to low slope roof assemblies. Tough Roof is an example of the modern built up roof systems as is the GRS Liquid Rubber Built up Flat Roof (a four layer voc free engineered liquid rubber flat roof with 800% elasticity and contains environmentally friendly synthetic fabric between layers vs. traditional tar felt paper.

Low Slope Metal Roofing

Roof Coating, Industrial Roof, Metal Roof, Leduc II

Low slope metal roofing (steel roofing, roof cladding, standing seam metal roofing) has been used for decades. This is  primarily used in commercial and  industrial roof settings.

With residential buildings, metal roofing is more typically found on steeper  roofs. GRS installs several of metal roofing systems to Mountain villages such as Whistler, Squamish, Canmore, Banff, Cranbrook, Fernie, etc.  More and more metal panel and metal shingle roof residential installations are growing,yet the greatest volume of metal work being completed is on industrial facilities.

An issue with this type of roofing is that there is no other form of roofing material that expands or contracts as much as the metal roofing does. The seams between the roof panels, the fasteners, roof openings at vents, chimneys, flashings, and skylights are consistently expanding and contracting . Due to this factor metal roofing systems are prone to leaks.
Another issue with the metal roofing systems is condensation.  Many roof leaks in homes or businesses are actually not leaky roofs, they in fact a pooling of water in the ceiling due to condensation.  It is important to deal with any condensation or leak issue before installing a new metal roof.
We are able to solve the problem of metal roof leaks by installing a premium roof membrane under the metal roof system. We use a premium caulking tape at the seams in addition to using hidden fasteners. Now one effective way to solve the potential of leaks or condensation issues is to torch a SBS modified membrane or spray liquid rubber before putting the metal roof on.

For a commercial roof and industrial metal roof that is leaking, typically we would coat the roof with liquid rubber. By doing this it helps to ensure that the roof  will be good for another 10 years or more. Trying to locate metal roof leaks and deal with them in an isolated way can be quite time consuming and unfortunately highly frustrating . For more information Click on the following link to go to our roof coating section of our website.

Until next time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

 

Low Slope Roofing: Metal, Shingles

Low Slope Flat Roof & Metal Roof
Low Slope Flat Roof & Metal Roof

General Roofing Systems Canada installed low slope roofing systems throughout Canada. Roof installation; Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

When re-roofing low slope roofing systems it is important to be sure you are using the right material for the right roof slope, local building code, and roof material manufacturer specification.

Below we provide a guideline for low slope shingles, roof membranes of flat roofs, and metal roofing.

Low Slope Roofing Shingles

Serious consideration is required when you are considering re-roofing a sloped system that is less than a 4/12 pitch.

For roofing with a 3/12 pitch, regular shingles can usually be installed with a two-ply 15 lb. roofing felt paper as underlay.

The GRS specification for installing roofing shingles is to never use felt paper. Instead, we use Ice & Water protector on eaves, valleys, around chimney flashing, etc. and use synthetic roof underlay such as titanium. In this instance (with a 3/12 roof), I would consider seriously using only an Ice & Water membrane versus the two-ply roofing felt. This is especially important around chimney and skylight flashing, and any roof vents, valleys, and openings.

A roof that has a 2/12 – 3/12 slope is more tentative and the risk increases. Some shingle manufacturers such as IKO with the Cambridge shingle will put a 12-year warranty on low slope roofs. Malarkey shingles will honour a 30-year warranty.Malarkey Roofing

A roof that is 2/12 or less in slope should have a “flat roof” or traditional “low slope membrane” installed. We like to see any roof that is less than a 4/12 slope get a low slope membrane that is fully adhered, mechanically fastened, or ballasted.

Other information (PDF):

Malarkey Shingle Installation Guide – Includes Install Instruction for Low Slope 2/12 – 4/12

IKO Low Slope Shingle Bulletin – Installation of Asphalt Shingles on Low Sloped Roofs

IKO Roofing – Applying Asphalt Shingles on Low Slopes (covers 3 tab shingles, eave protection, etc)

IKO Shingles
IKO Shingles

Low Slope Roof Membranes (Flat Roofing)

Low slope membranes for flat roofing come in a few categories:

  1. Single-ply membranes in the form of EPDM (rubber), TPO (thermal plastic), or PVC (polyvinyl chloride). They are either fully adhered, mechanically fastened, or ballasted.
  2. Two-ply membrane, the primary choice being SBS modified bitumen that can be torched down or cold applied.
  3. Built-up roofing (BUR). Another way of describing multilayer roofing. An examples would be the traditional tar and gravel roofs, or flat-top tar roofs.
  4. New BUR. More recently, modern technologies have advanced the built-up roof so that they utilize environmentally friendly products and modifiers versus the tar or bitumen commonly used in tar roof systems. These newer versions are extremely tough, will outlast almost any other roof (in our opinion), and are VOC-free, making them sustainable offerings to low slope roof assemblies. The GRS liquid rubber built-up flat roof is an example of a modern system with 800% elasticity and environmentally-friendly synthetic fabric between layers, as opposed to employing the use of traditional tar felt paper.
  5. Spray Foam Roofing.
Low Slope Roof
Low Slope Roof

Low Slope Metal Roofing

Low slope metal roofing (steel, cladding, standing seam) has been used primarily in industrial and commercial settings for decades.

With residential roofing, metal is more typically found on steeper residential roofs. We install a lot of metal systems at mountains villages like Squanism, Canmore, Banff, Cranbrook, Fernie, etc. We also do a lot of residential metal roof shingle installations in cities like Vancouver, Edmonton, and Calgary. Residential metal panel and shingle installations are growing in popularity, but the greatest volume of metal work is on industrial facilities by far.

Low Slope Metal Roof
Low Slope Metal Roof

At issue with metal roofing is that no other form of roofing material expands or contracts as much as metal does. The seams between roof panels, the fasteners, roof openings at vents, chimneys, flashings, and skylights are expanding and contracting all the time. Ultimately, metal roofing leaks due to this expansion and contraction.

Also, condensation with metal or steel roof systems can be an extremely frustrating situation. Many roof leaks with homes or businesses are actually not leaky roofs. Instead, it is water coming through the ceiling as a result of condensation.

Dealing with the potential leak or condensation issues with metal roofing in advance of installing a new system is key.

We solve the problem of metal roof leaks with installing a premium roof membrane under the metal roof system, using a premium caulking tape at the seams, and installing hidden fasteners. If you really want to solve the potential of leaks or condensation in advance, torch an SBS modified membrane or spray liquid rubber in advance of putting the metal roof on.

For commercial roofing and industrial roofing that already has a metal roof on that is leaking, typically we will coat the roof with liquid rubber and it will be good for another 10 years or more. Trying to locate metal roof leaks and deal with them in an isolated way is not usually a good investment of time. Click here to visit the roof coating section of our website.

Until next time,

The Team at GRS

CONTACT US:

General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com.

British Columbia | Alberta | Saskatchewan | Manitoba | Ontario