Roof Vents and Attic Ventilation: Problems and Solutions

General Roofing Systems Canada provides roof ventilation repairs to  throughout Canada.  Roof ventilation Repairs are completed in the following cities; Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario

Roof Ventilation Changed for Proper Attic Air Flow (Condensation Problems)

This is the time of year that we receive a number of calls from homeowners regarding  leaking roof problems.

Some of the top reasons for leaking roof problems are:

  1. Chimney flashing is installed incorrectly and is leaking.
Roof Repair Roof Leak
Replacement of Flashing around the Chimney is done correctly using roof membrane (ice and water) and then proper flashing is installed to back and side of chimney
  1. Skylight flashing has leaks due to incorrect installation.
100_0709 - Copy
Skylight Repair and Replacement in Progress. Premium roof underlay membrane is installed around the skylight which keeps it from leaking.


3. Valleys on roof are leaking. Shingles in roof valleys are commonly done wrong.

100_0702 - Copy
Roof Valley being installed correctly with roof underlay. Roof flashing installed on top, and synthetic roof underlay to rest of roof.
  1. Attic condensation that causes moisture in the attic. The attic moisture manifests as “roof leaks” due to poor roof ventilation. Roof ventilation is not adequate at either the ridge of the roof (exhaust) or at the soffit area (intake).
Roof Sheeting Mold, Attic Mold, Condensation II
Attic Ventilation Problems Cause Condensation and Roof Rot, Mold, Energy Loss, and More

 

  1. Improper Installation of Roof Underlayment.
Re-Roofing, Shake to Asphalt, Coloured Metal Drip Edge - Eave Edge
Properly Installed Roof Underlay : The Ice and Water Shield is installed to roof deck at roof eave edge and synthetic premium underlay installed to rest of roof (complete roof area covered and no wood is left to show, roof tar felt is not used as it dries out and cracks and causes leaks)

 

  1. Improper Installation of Roof Vents and Penetrations
Ice and Water Membrane to Back and Sides of Roof Openings, Wall, Step
Above is an example of proper roof vent installation. This method can be used with any penetration at the roof deck. Roof vent has caulking under vent, high quality ice and water underlay is applied to both sides and to the back of vent which will not allow ice build up to enter under shingles to cause any roof leaks.
  1. Improper Installation of Roof Flashing at Wall (where roof meets a wall).

Shake Roofing, Shake Roof Repair Alberta, General Roofing Systems Canada (Alberta)

OLYMPUS DIGITAL CAMERA
The Roof Flashing at wall base on this home was not done correctly (non existent) on this cedar roof resulting in the home-owner experiencing leaks.

 

The home in the photos of this roof repair were experiencing leaks in there skylights. To resolve this issue, we changed the skylight flashing, which brought forth further attic condensation problems. The combination of the two problems resulted in the roof ventilation needing  to be repaired.

The steps to complete this repair are as follows:

Remove roof vents at peak of roof. 

  1. Remove IKO shingles around roof vents to expose roof underlay.
  2. Remove roof underlayment to roof deck (sheathing).
  3. Remove DuroFlo vent to expose roof attic space.
  4. Inspect exposed roof deck for damage due to attic moisture (condensation).
  5. Install backing to opening and fasten roof deck patch to holes.
  6. Install patch cut to fit each hole.
  7. Install new roof underlay.
  8. Install IKO shingles as needed.

Install 2 new Whirlybird turbine roof vents at peak:
1. Remove IKO shingles at location on roof.
2. Remove roof underlay to expose roof deck.
3. Inspect roof boards for condensation.
4. Cut hole in roof deck to install new vents
5. Attach whirley bird vents to roof deck over vent access.
6. Install new underlayment.
7. Install IKO shingles as needed

Roof Repair, Residence has Attic Condensation Problems

Roof Repair - Attic Ventilation - Whirley Birds

Attic Ventilation, Remove Duroflo Vents to Whirley
Attic Ventilation, Remove DuroFlo Vents and change to Whirlybird turbines
Shingle Roof Repair
New IKO Shingles installed
Roof Repair,
IKO Dual Black Shingles installed Over Vent Hole
Roof Repair - Attic Ventilation - Whirley Birds
Whirlybird Installation for Attic ventilation repair
Attic Vents - Whirley Bird
Attic Vents – Whirlybird
Roof Vents - Remove Duroflo Vents
Nearing job Completion

 

About Roof Ventilation:

Correct attic ventilation provides your roof with the correct amount of airflow to prevent moisture buildup. Moisture in the attic space causes roofing to rot and release condensation. Proper ventilation will help energy costs by regulating the temperature of your home.

Attic ventilation is important to reduce the buildup of heat in your attic which can cause ice dams, shingle decay, condensation, higher energy costs and even mould. Additional ventilation is often required in older homes to meet the BC, Alberta, and Saskatchewan Building regulations. This is also required to meet  the shingle manufacturer warranty requirements.

Attic ventilation can be corrected:

The roof repair above shows us adding roof vent turbines (whirley birds) to increase air flow to the attic in this home. You can also install ridge vents or more conventional roof vents.

How to Calculate Proper Attic Ventilation:

There is no such thing as having too much attic ventilation.  Realistically you want your attic to be the same temperature as it is outside in the winter and in the summer you want  to be able to get the warm air out.

The primary focus when  ventilating an attic is to not actually bring down the attic temperature (of course this would be beneficial in summer when your house and attic are hot). The main reason for ventilating the attic is to eliminate the moisture in your attic space that causes roof leaks and a host of other problems such as; ice dams, rot, shingle warranty problems, paint peeling and mould. Improper venting causes your house to sweat and not breath right.

The following is how you would calculate the proper amount of ventilation required for an attic:

  1. Multiply the total square footage of your attic space by 144.
  2. Divide the total above by 2.
  3. Divide total above by by 300.
  4. What is called the “net free” area you now know. The net free square inch area required for intake ventilation (for example at soffit) and the exhaust ventilation (for example the vents at the ridge as in the photos above).
  5. Divide the “net free” area by the ‘”net free'” area the Ventilation Product Manufacturer provides on the box. This will be your calculation for how many roof vents you need to install for correct attic ventilation.

Attic Solution – Keep the Heat Under Control With Proper Attic Ventilation!!!

Until Next Time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario

Roof Snow Removal Considerations

General Roofing Systems Canada provides roof repairs throughout Canada. Roof Repairs are completed in the following cities: Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Roofing, Roof Repair – Preventative Roof Maintenance Encouraged Before Winter Comes!

Fall has arrived and winter is just around the corner. This time of year is when people tend to be the most busy, with having just came back from vacation to children starting school and various other activities. With so much on the go for people, the last thing that you want to think about is the ROOF!

Yet the reality remains, this is also the busiest time for roofers, as facility managers and homeowners alike start to prepare the buildings for the harsh weather that winter brings. This is the best time to consider whether or not your roof has any current issues that need attending to.

snow and ice damming
Ice damming across a gutter system

The snow loads in Central Alberta and Northern Alberta were record setting. For many of the roof systems, if they did not fail or have issues last winter, it is almost certain they will have problems this winter.

We have  watched several commercial and industrial roofs completely fail in the Edmonton and Red Deer areas. The roofs literally buckled under the pressure from all the weight of the snow we received. Yet we believe this could have less severe had proper maintenance been taking place before the season hit.

This  winter has proven to be highly unusual. We experience such diversities in the climates all around western Canada. For example, in Vancouver our crews were busy with torrential rain, while in Saskatoon and Regina they were busy with snow falls, and in Calgary it was a constant cycle of  freeze and thaw. All this diverse weather  kept our roofing crews at complete capacity, often having to work many hours of overtime.

Some things to consider for your commercial, industrial, and residential roof maintenance prior to the next winter setting in;

Flat Roofing: Any flat roofing that took on heavy snow loads will most definitely require some attention. We highly recommend that owners heed the warnings from the previous season and at least asses the current quality of there roof, it would be best to have this assessment completed before the first snow fall. We have an annual roof repair and maintenance check list for flat roofing and the maintenance required to be completed listed on our website.


Metal Roofing: Metal roofing was hit the hardest last winter. The reason is that metal roof systems, especially commercial and industrial, had snow loads that compromised the metal roof panel seaming. In other words, the metal panels on the roof have been warped or pressed down so hard that the seams between the panels and the fasteners are compromised. The other issue we are seeing with industrial and commercial metal roofing this year is that many of the gutter systems are damaged.

The problem with metal roof systems on industrial buildings is that when the ice builds up in the gutter it will then back up and enter the building under the metal cladding. Fortunately, there are excellent solutions for metal roof issues yet most cases do require a full replacement.

Nowadays we can coat metal roofing with liquid rubbers. This is a elastomeric spray on roof coatings that will seal the metal roof seams, fasteners, and vents.

To learn more about how to solve metal roof leak problems search the topic on our blog at the top right corner. Simply type in your inquiry and our search engine will show results of the pages to help.

In addition to this, our main web site contains several pages on metal roofing, roof coatings, and roof repairs. You can find this information listed below with  the following links:

Residential Roofs: These systems did not have nearly as many structural  failures that occurred with Industrial and Commercial roofing last year. Although that is not saying that residential roofs, roof attic ventilation and condensation did not have their fair share of complications.  The reason being is that with the snow loads on roofs, the ice damming, condensation and ice backups in gutters, caused numerous problems.

As stated earlier, this winter season has been a treacherous one. Due to this fact, GRS would like to remind everyone to have an assessment completed on their roof for the next season BEFORE snow begins to fall.

Until next time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS).
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Choosing the Right Roof Ventilation

General Roofing Systems Canada installs roof vents throughout Canada. Roof vent service in Toronto, Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler and points between.

Roof ventilation is one of the most misunderstood components of the roofing industry. Unfortunately, we respond to roof leaks all the time that are a result of improper ventilation, and the company that installed the new roof system did not even consider it. Worse yet, many companies install brand new roofing products which will only last a portion of the time it should after their clients pay good money. This is obviously a sore spot for the roofers here at GRS.

“Improper roof ventilation will cause your roof to not perform correctly and will cause ice damming, sheathing rot, mold, condensation, leaks, and will cause your roof membrane or roof shingles to deteriorate prematurely.”

The ratio of roof vent exhausts on a sloped roof is about 250:1. In other words, you need about 1 sq. ft. of roof vent (or exhaust from your roof) for every 250 sq. ft. of roof deck. This should be equal to the roof system intake, which is typically located under your roof soffits.

The main types of vents for your roof and attic are as follows:

  • Standard Roof Vents or Roof Louvers: These are the standard vents that are
    Lomanco Standard Roof Vent
    Lomanco Standard Roof Vent

    typically the ones you see everyday on sloped roofs (if you have ever stopped to notice, we know roof venting is a boring topic). These roof vents are available in a variety of styles and colours.

 

  • Whirlybirds or Turbine Roof Vents: Whirlybird vents, turbo vents, or roof
    Turbine Vent - Duraflo
    Turbine Vent – Duraflo

    turbines, as they are called generically, are the ones you see on sloped roofs that turn in the wind.

  • Powered Roof Vents or Solar-powered Roof Vents: Powered roof vents need to be hooked up by an electrician (as they use power), and solar-powered ones are obviously powered by the sun. A caution to solar buyers – be sure to use a reputable solar vent supplier and an installer of the roof vent that know what they are doing.

One of the suppliers we recommend is Lomanco. The Omni Solar Roof Vent by them is of excellent quality and the vent itself performs as advertised and performs very well. Information on this solar roof vent IIvent system is available here.

  • Ridge Line Vents or Roof Ridge Vents: Ridge venting is one method of roof venting we recommend to our customers often. The ridge vent allows constant, even predictable roof or attic ventilation. In areas in the north such as Edmonton, Fort McMurray, Lloydminster, and Saskatoon, the ridge vent can save your home from leaking due to attic condensation when snow loads will cover over the exhaust of traditional ventilation systems.
Ridge Vent on Shingle Roof
Ridge Vent on Shingle Roof

Ridge venting is more costly as the sheathing at the ridge of your roof needs to be cut on both sides for the system to be installed. However, it is well worth the cost. Lomanco, Duraflo, and GAF are our suggested providers for this system.

  • Gable Vents or Attic End Vents: Self-explanatory. This system is found on the end of your home at the gable siding.
  • Intake Vents or Soffit Vents: The intake portion of your attic venting is typically in through the soffits. There are a number of soffit style vents. Stay tuned for our blog article on calculating intake venting.

Until next time,

The Team at GRS

Miscellaneous General Roofing Documentation

Choosing a Roofing Contractor for your Roof Ventilation Install or Repair

Our Roof Ventilation Guarantee – Lifetime Workmanship Guarantee
https://www.grscanadainc.com/Roofing_Installers.html

Our Roofing Portfolio
CONTACT US:
General Roofing Systems Canada (GRS)

24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com.

British Columbia | Alberta | Saskatchewan | Manitoba | Ontario

Re-Roofing Your Home | Be Sure to Inspect Your Attic First!

General Roofing Systems Canada provides re-roofing services throughout Canada. Toronto, Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler and points between.

Inspect your attic space before you start your residential re-roofing project.

Replace wood deck sheathing that is rotted or water damaged, analyze attic air exchange, and install attic air vents to be sure your attic is ventilating properly. Check for heat loss at the vapour barrier, be sure your insulation is doing the job, and replace plumbing boots, roof flashing, etc. as required while you are at it.

When replacing your residential sloped roof, it is critical to inspect your attic space first.

If you re-roof your home without inspecting the attic for roof rot, water damage, vapour barrier issues, heat loss to the attic, and proper air intake/exhaust, you are risking have to re-roof again in half the time or worse.

If this occurs, what was the real cost of your new roofing shingles?

Proper ventilation in your attic, building envelope heat loss, proper insulating, and other components of professional shingle re-roofing standards and procedures all play important factors in the process of a shingle roof replacement, and it greatly affects the length of time your new shingles will last.

The best roof shingles are shingles that are on the best roof system.

You can have the best shingles in the world and they will prematurely fail if your roofing system is deficient.

If you install a new shingle roof, and you do not check the attic space, you are SG1S1505really re-roofing shingles (or any other roofing material) with a lot of risk to your newly shingled system. Not to mention, most people decide to re-roof their home due to the fact that something is not right with their roof to begin with. We heard statements such as:

  • “The roof is leaking.”
  • “The roof is ice damming, and now snow or water backup is causing roof leaks.”
  • “The roof valleys are leaking.”
  • “Our shingles are just no good and they need to be replaced.”

The point is, there are many reasons roof shingles do not last as long as they should.

For example, if you have a vapour barrier issue (warm air from the inside of your home is entering the attic space) and the warm air entering your attic space is then causing ice damming on your roof, the ice damming then causes leaks (the ice or snow on the roof melts and freezes and melts and backs up under the shingles and then leaks into the attic, all because the underside of the roof sheathing is too warm due to heat loss into the attic). Moisture then causes roof rot to the sheathing which isn’t healthy. The ice backup on the roof damages the shingles and roof underlay, the moisture destroys your insulation, and the water leaking into your home can do all sorts of damage.

Before you re-roof your home and pay the cost for new shingles, you want to know if heat loss into your attic is occurring or your roof sheathing is rotten. If you do not do this before the new shingles are installed, you risk investing in new roofing and the roof rot not being uncovered and replaced, and the warm air coming in to your attic that now causes roof ice damming the following year and perhaps the roofers didn’t install ice and water properly or at all or metal to the roof valleys under the shingles or a host of other possibilities and now you have a brand new shingled roof that cost you an arm and a leg that is leaking with roof rot on the roof sheathing and you need another new roof! You see the possible problems? (Talk about a run on sentence!).

Ice and Water Membrane to Back and Sides of Roof Openings, Wall, StepFrom the same example, let’s say you do not do an assessment of the air ventilation and now you have a new shingle roof, AND your attic air intake is plugged at the soffits by insulation. On top of that, your roof vent exhaust isn’t working properly because you only have four duro-flo air vents at the ridge for a 2100 sq. ft. home/attic space. You’ve had leaking in your home due to condensation in the past and your roof system can’t breathe and your old shingles deteriorated prematurely with your last roof. By now you must be thinking “My roof or shingles only lasted 12 years, and the limited shingle warranty was for 30 years! What the heck?).

Well, news is that your new roof shingles will only last 12 years. Your new limited lifetime warranty on your shingles won’t cover the costs because your roof ventilation ratio is not right, your intake air is compromised because there is insulation covering the intake vents at the soffits, and the exhaust attic ridge vents can’t work properly either…. not to mention that your house is 80 years old and the vapour barrier is compromised and is letting warm air into your attic space, etc. etc. etc. Replacing shingles after having new shingles put on only 10 years earlier is not where you want to be (especially when the wife finds out that it wasn’t the roof shingles fault!). Anyway, sorry I am off track…

The lesson here is… your new shingles will last decades and decades and decades if the roof system and attic space is proper for the new roof shingles to perform properly (and you look like the wise leader of the home to boot!)

I think we all get the point here…

As of 2011, our new policies mandate that we cannot re-roof a home with shingles unless a thorough attic inspection is done prior.

The GRS Standard Re-Roofing Specifications and Pricing now allows for this service in the price we quote you for new shingles. It also allows for a venting analysis, new roof vents, plumbing boots, etc. in the cost of your new roof shingles. Movement of insulation away from the soffit areas is also in the cost of your new shingles, as well as replacement of deck sheathing up to 100 sq. ft. As long as you don’t have a major roof or attic space remediation issue requiring the services of a restoration expert, for the most part, the price you receive from GRS for re-roofing your shingles is the same price to also bring your attic space up to par so the system performs as it should.

Some examples of standard GRS shingle replacement specifications are:

Roof sheathing needs to be replaced if it is rotting (which is also a health risk) or has excessive water damage from ice damming back up – this is a Standard Specification in the GRS Shingle Re Roofing Cost and our shingle re roofing prices include up 100sq ft of roof sheathing replacement. Air ventilation calculations are required and an analyis of your attic ventilation is completed free of chaege, air vents are included in the new price of your shingles, inspection of the insulation and inspection of your vapour barrier is also included in the cost of your new shingles. Insulation replacement and vapour barrier replacement is not included in the price of your new shingles but the inspection is included and is complimentary.  

  • Request a Re-Roofing Assessment and Shingle Re-Roof Costs here.
  • Information on our Shingle Roofing Specifications and How We Install Roof Shingles is found here: https://www.grscanadainc.com/Pitched_Roofing.html.
  • Information on Hiring the Best Roofing Contractors is found here:

https://www.grscanadainc.com/Choose_Roofing_Contractor.html.

  • Visit the main GRS Website here.

If you have questions about our post on roof ventilation and the affects of your roof system on your new shingles, if you require emergency roof repairs, or just have a simple query call us 24 / 7 on our toll free line +1.877.497.3528.

Until Next Time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS)

24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com.

British Columbia | Alberta | Saskatchewan | Manitoba | Ontario

Emergency Roof Repair Situations

General Roofing Systems Canada provides roof repairs throughout Canada. Roof Repairs are completed in the following cities; Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

100_0110
Emergency Roofing Repairs

Wind Warnings and Torrential RainFall has been causing roof failures in British Columbia, while meanwhile in Southern Alberta high Winds are Blowing Shingles, Shakes, and Tiles off Roofs Again.

This week has been tough on roof systems from the West Coast all the way to Saskatchewan. Our call center has been over-whelmed with wind related roofing repairs calls along the West Coast including Victoria, Vancouver Island, Vancouver, Vancouver North Shore, and in the Fraser Valley. While in Southern Alberta such areas like Lethbridge, Medicine Hat, Okotoks, and even into Calgary have been experiencing wind gusts of up to 120 km/h.

The unusual high winds have been tearing shingles off roofs and causing general havoc with a variety of roofs types. We have received calls with complaints of skylights blowing off or leaking, roof vents, flashing, and even roof hatches needing repair.

With the heavy rain on the West Coast, this has caused flat roofs to fail, this particularly has applied to those that have drainage issues or drains that are plugged. With the cycles of having warm air thawing to only freeze again due to the Chinooks in areas like Calgary, AB, this has been resulted in our 24 Hour Toll Free Emergency Roof Repair line to receive several repair calls.

We are finding that Roofs with improper attic ventilation are having condensation issues to areas even as far north as Edmonton and flat roofs are requiring more maintenance to clear drains that are freezing over with ice.

Solutions for Roof Repairs, Attic Condensation, and Roof Drainage Issues

There are some solutions we can offer to help with the various problems roofs have this time of year. However If you cannot solve the repair or maintenance issue by yourself, call our 24 hour emergency roof repair toll free number at 1.877.497.3528 and schedule a repair person to attend.

Flat Roof Membranes
Repair Crew Fixing Flat Roof Connected to an Industrial Metal Roof

Flat Roof Drainage Problems: Flat roofs unfortunately do require some regular maintenance, especially in high winds and freeze-thaw cycles.

Roof Drainage: The roof drains are prone to clog from leaves, tree branches, and with the ice and snow melting and freezing on the roof. Drainage problems on flat roofs can also be compounded by an inadequate slope of the roof. Nonetheless, a spring and fall maintenance of the roof is key to ensuring the roof bears well during bad weather. Click here to see our  Flat Roof Maintenance check list.

Roof Inspection: Extreme winds, heavy rain-fall, and snow and ice melting should trigger an inspections to be completed. It is preferable that this is completed during the storms to ensure our technician’s ability to see if the roof drains are clear.

Roof Slope Problems: With improperly sloped flat roof systems, there are solutions to mitigate these issues. An improper roof slope can be examined with our technician at the time of inspection or while we are performing maintenance to your roof.

Condensation in Attic Spaces

Roof Sheeting Mold, Attic Mold, Condensation II
Condensation in Attic Space

Sloped or Pitched Roof Attic Condensation Problems Attic condensation repairs or remediation tend to be a more involved process requiring a number of steps.

Solving Attic Condensation

Your attic require proper ventilation. You need to check the intake air typically at the roof soffits to be sure that there is enough air coming in to your attic space. Be sure to check that insulation is not covering the air from entering your attic by following the air flow along the roof sheathing to where you come to the ridge or peak of the roof.

Check the exhaust vents (typically by each square foot or along the ridge) to be sure they are not plugged with snow and see if there are enough roof vents. You will need about 1 square foot of roof venting per 100 – 300 square feet of attic. A calculation commonly used by our roofers for attic / roof ventilation is 1:250. If the air vents exhausting the intake air is appropriate then you need to check the vapor barrier of the attic. It cannot be compromised and be letting warm air in.

Warm air rises through the attic into the roof sheathing. The snow on the roof then melts and creates ice dams. The ice dams then back up under shingles, shakes, and tiles causing leaks in to attics and then ultimately in to your house through the ceiling. If none of these problems can be found in your attic, it is best for you to then call the experts.

Shingles Torn off in winds

Wind Blows Shingles off Improperly Installed Shingle Roof in Calgary
Shingles Torn off in Winds

High Wind damage and Roof Repairs to Shingles, Tiles, and Shakes Repairing Damaged Roofs: Ultimately, after the installation of shingles, tiles, or shakes are complete and the winds begin to increase, you can now face blow-off problems. The best we can do is repair the windblown damaged roof.

How to Shingle a Roof: Prior to having your roof replaced, it is a good idea to know the specifications and the proper way to shingle a roof to ensure your roofing contractor is in check at time a roof replacement is required. Our website has a series on How to Shingle a Roof that explains the process of shingling for areas with high winds and how to avoid costly repairs due to wind damage.

Roof Underlay: Beyond the actual installation principles when replacing your shingles, shakes, or tiles there is the issue of the roof underlay. If the proper roof underlay is used and is installed correctly, then one does not have a concern in regards to shingles, shakes, or tiles being blown off. The roof underlay or membrane will keep the roof water-tight with-out the shingles so no leaks occur.

Shingles for High Winds: Finally, there are roofing shingles available that are designed to withstand high winds. Shingles like the Malarkey Legacy have high wind ratings of up to 170KM per HR which gives areas like the West Coast, North Shore of Vancouver, Calgary, Lethbridge etc. some advantage over the winds that damage roofs every year.
Should you have any questions or concerns regarding your roof, our office is always able to provide over the phone advice, set up inspections or arrange for a complete repair.

Until Next Time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.