Survey of the Commercial Roofing Process

General Roofing Systems Canada provides repairs to Commercial Roofs throughout Canada. Commercial Roof Repairs are completed in the following cities: Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario

Maintenance, Restoration, or Replacement?

When reviewing the process of commercial roofing, the first step is to decide what method of roofing is required. Of course, there will be decisions in regards to the metal used, yet this all depends on whether or not you have a flat roof. For example, you may be looking to repair your roof, perform annual maintenance, completely replace or restore your existing system.

Repairing Your Commercial Roof

Commercial roofing repairs are best done by a roofing contractor that complete repairs on a daily basis and who is aware of all the commonly accepted standards. GRS employees are highly trained to work with all varieties of commercial roofs; our crews undergo extensive training that help them to assess and repair any and all issues. Flat roof repairs are specific to the type of commercial roof such as; Tar and Gravel, Torch-on SBS, TPO, EPDM, PVC, Roof Coatings, or SPF – Spray Foam. It is important to have roofers that are aware of the type of commercial roof membrane that is being repaired.

Metal roof repairs on commercial buildings are also type-specific. These common types are are metal cladding roofs, standing seam metal roof systems, and coatings with a reflective coating or black rubber liquid coating.

The objective is to locate a commercial roofing contractor that has technicians with the knowledge of all commercial roof types.

Preventative Maintenance

Commercial roofing systems require regular maintenance. In most instances maintenance on a commercial roof (flat roof) should be completed a minimum of twice a year. It is recommended to have this completed once in the fall and once in the spring. GRS has specific commercial roofers that specialize in roof maintenance. Our roofers are aware what to look for and how to solve specific commercial roof problems. Our web site contains a step by step list for commercial flat roofing repair and maintenance:

Metal Roof Maintenance

Metal commercial roof systems also require regular maintenance. Maintenance should be performed on all the metal seams, metal roof fasteners, and roof openings. Sometimes this only requires a simple process of caulking (be sure to use high-end metal caulking). Yet with scenarios, when the metal roof is beginning to fail due to rust or expansion/contraction of the metal seams and holes for the fasteners, more extensive roof repair or roof restoration becomes a necessity. This is another area where it would be beneficial to have type-specific contractors completing the work.

Our roofing blog has numerous articles regarding metal roofing, metal roof repair, and metal roof restoration. Simply search your topic by category on the left hand side of the page.

Roof Restoration

Restoring Your metal or flat commercial Roof when regular commercial roof repair and maintenance doesn’t alleviate the problems you are experiencing with your metal or flat roof, more extensive restoration is required. One significant advantage of restoring your commercial roof rather than replacing it is the tax benefit. Roof restoration is considered maintenance and not typically considered a capital cost as it would with a complete roof replacement.

Metal roof systems are filled with challenges, especially in colder climates like Alberta and Saskatchewan. For example, in Edmonton, AB last winter, the snow loads were so immense with the ice damming on the metal roofs, as well as the heavy weight loads, that several metal commercial roofs were affected. Our metal restoration crews have been working nonstop since last winter to repair and restore metal roof systems on numerous commercial and industrial facilities. The advantage of having a metal roof on your commercial facility is the longevity of the material. Metal roofs are known to last several decades before requiring full replacemetns.

The inherent challenge with commercial metal roofing is that the metal expands and contracts. This is especially true in our unpredictable Western Canadian climate. Unfortunately, many leaks occur as a consequence.

When thinking about restoring a metal roof it simply comes down to two things. First is whether or not you would want white reflective metal roof restoration, or do you want a black roof?

In today’s market, there are several advancements to metal roof coatings. One primary example would be the liquid rubber polymers that were created for waterproofing commercial metal roof systems.

The challenge with reflective coatings for metal roofs is that coatings such as acrylic, which are highly reflective, also contain the disadvantage of cracking and peeling. The important items to be considered when choosing a restoration process or coating for your commercial roof is to be sure that the roofing contractor you hire is experienced and knowledgeable as to what is required. It is also important to inspect the coating material being used on your commercial roof. This is important due to market factors drastically changing over the past few years.

The same applies for flat roofing as it does for metal as we described above.
Coatings for commercial roof systems in this day and age have radically changed as restoring a flat roof today is not the same it was 3 years ago. At one time (and we still restore tar and gravel commercial flat roof this way), we would re-coat flat roofs with bitumen or tar from a hot kettle. Or in the case of a rubberized asphalt commercial flat roof, we would re-coat with hot rubberized asphalt.

Commercial roofing today has many more options. More recently many commercial property owners have been having roofing contractors spray foam their roof systems. With this process you skirt around the entire old method all together. Once the spray foam has been laid down you then add an acrylic reflective top coat to the SPF.

The process of spraying foam over an existing commercial roof is highly effective and cost efficient  – although this isn’t always the best method for an extended amount of time. There are coatings that are asphalt based that contain fiberglass that can be used to coat roof systems and emulsions. And then more recently elastomeric coatings have become available. This newer type sprays right over top of the existing system. Finally the most recent to come forward on the market is liquid rubber coating. Liquid rubber coating has been an excellent success for both roofers and owners alike.

Roof Overlays or Retrofits

An example of a roof overlay or retrofit is when your current commercial roof system has a tar and gravel roof. Instead of coating the roof and completely ripping out the roof and replacing it entirely, you can retrofit or recover it. There are many forms of flat roof recovery. One method is for our roofers to scrape or spud the gravel off. Our roofers will then install an insulation board and the roofing membrane right over top. For more information on retrofitting you can reference our blog and website.

Complete Roof Replacement

Complete roof replacements are a massive undertaking. In order to have this procedure completed correctly it is extremely important to choose the right contractor for your project. The contractor you choose must have roofers that are trained and have accurate knowledge of all roofing systems. In addition to this you will need to choose the right method of roof replacement or retrofit. Once you have done that, the next item to select will be the right membrane and search out a reasonable competitive price.

GRS has written extensive articles to assist commercial property owners with the process of completing roof replacements, some of which are on our blog and website. Here are some articles for your consideration when planning a commercial roof replacement:

https://www.grscanadainc.com/Commercial_Roof_Replacement.html – Considerations for Commercial Roof Replacements

https://www.grscanadainc.com/Replacing_a_Flat_Roof.html – The process of Commercial Roof Replacement

Until next time,

The Roofers at GRS

CONTACT US
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Roof Vents and Attic Ventilation: Problems and Solutions

General Roofing Systems Canada provides roof ventilation repairs to  throughout Canada.  Roof ventilation Repairs are completed in the following cities; Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario

Roof Ventilation Changed for Proper Attic Air Flow (Condensation Problems)

This is the time of year that we receive a number of calls from homeowners regarding  leaking roof problems.

Some of the top reasons for leaking roof problems are:

  1. Chimney flashing is installed incorrectly and is leaking.
Roof Repair Roof Leak
Replacement of Flashing around the Chimney is done correctly using roof membrane (ice and water) and then proper flashing is installed to back and side of chimney
  1. Skylight flashing has leaks due to incorrect installation.
100_0709 - Copy
Skylight Repair and Replacement in Progress. Premium roof underlay membrane is installed around the skylight which keeps it from leaking.


3. Valleys on roof are leaking. Shingles in roof valleys are commonly done wrong.

100_0702 - Copy
Roof Valley being installed correctly with roof underlay. Roof flashing installed on top, and synthetic roof underlay to rest of roof.
  1. Attic condensation that causes moisture in the attic. The attic moisture manifests as “roof leaks” due to poor roof ventilation. Roof ventilation is not adequate at either the ridge of the roof (exhaust) or at the soffit area (intake).
Roof Sheeting Mold, Attic Mold, Condensation II
Attic Ventilation Problems Cause Condensation and Roof Rot, Mold, Energy Loss, and More

 

  1. Improper Installation of Roof Underlayment.
Re-Roofing, Shake to Asphalt, Coloured Metal Drip Edge - Eave Edge
Properly Installed Roof Underlay : The Ice and Water Shield is installed to roof deck at roof eave edge and synthetic premium underlay installed to rest of roof (complete roof area covered and no wood is left to show, roof tar felt is not used as it dries out and cracks and causes leaks)

 

  1. Improper Installation of Roof Vents and Penetrations
Ice and Water Membrane to Back and Sides of Roof Openings, Wall, Step
Above is an example of proper roof vent installation. This method can be used with any penetration at the roof deck. Roof vent has caulking under vent, high quality ice and water underlay is applied to both sides and to the back of vent which will not allow ice build up to enter under shingles to cause any roof leaks.
  1. Improper Installation of Roof Flashing at Wall (where roof meets a wall).

Shake Roofing, Shake Roof Repair Alberta, General Roofing Systems Canada (Alberta)

OLYMPUS DIGITAL CAMERA
The Roof Flashing at wall base on this home was not done correctly (non existent) on this cedar roof resulting in the home-owner experiencing leaks.

 

The home in the photos of this roof repair were experiencing leaks in there skylights. To resolve this issue, we changed the skylight flashing, which brought forth further attic condensation problems. The combination of the two problems resulted in the roof ventilation needing  to be repaired.

The steps to complete this repair are as follows:

Remove roof vents at peak of roof. 

  1. Remove IKO shingles around roof vents to expose roof underlay.
  2. Remove roof underlayment to roof deck (sheathing).
  3. Remove DuroFlo vent to expose roof attic space.
  4. Inspect exposed roof deck for damage due to attic moisture (condensation).
  5. Install backing to opening and fasten roof deck patch to holes.
  6. Install patch cut to fit each hole.
  7. Install new roof underlay.
  8. Install IKO shingles as needed.

Install 2 new Whirlybird turbine roof vents at peak:
1. Remove IKO shingles at location on roof.
2. Remove roof underlay to expose roof deck.
3. Inspect roof boards for condensation.
4. Cut hole in roof deck to install new vents
5. Attach whirley bird vents to roof deck over vent access.
6. Install new underlayment.
7. Install IKO shingles as needed

Roof Repair, Residence has Attic Condensation Problems

Roof Repair - Attic Ventilation - Whirley Birds

Attic Ventilation, Remove Duroflo Vents to Whirley
Attic Ventilation, Remove DuroFlo Vents and change to Whirlybird turbines
Shingle Roof Repair
New IKO Shingles installed
Roof Repair,
IKO Dual Black Shingles installed Over Vent Hole
Roof Repair - Attic Ventilation - Whirley Birds
Whirlybird Installation for Attic ventilation repair
Attic Vents - Whirley Bird
Attic Vents – Whirlybird
Roof Vents - Remove Duroflo Vents
Nearing job Completion

 

About Roof Ventilation:

Correct attic ventilation provides your roof with the correct amount of airflow to prevent moisture buildup. Moisture in the attic space causes roofing to rot and release condensation. Proper ventilation will help energy costs by regulating the temperature of your home.

Attic ventilation is important to reduce the buildup of heat in your attic which can cause ice dams, shingle decay, condensation, higher energy costs and even mould. Additional ventilation is often required in older homes to meet the BC, Alberta, and Saskatchewan Building regulations. This is also required to meet  the shingle manufacturer warranty requirements.

Attic ventilation can be corrected:

The roof repair above shows us adding roof vent turbines (whirley birds) to increase air flow to the attic in this home. You can also install ridge vents or more conventional roof vents.

How to Calculate Proper Attic Ventilation:

There is no such thing as having too much attic ventilation.  Realistically you want your attic to be the same temperature as it is outside in the winter and in the summer you want  to be able to get the warm air out.

The primary focus when  ventilating an attic is to not actually bring down the attic temperature (of course this would be beneficial in summer when your house and attic are hot). The main reason for ventilating the attic is to eliminate the moisture in your attic space that causes roof leaks and a host of other problems such as; ice dams, rot, shingle warranty problems, paint peeling and mould. Improper venting causes your house to sweat and not breath right.

The following is how you would calculate the proper amount of ventilation required for an attic:

  1. Multiply the total square footage of your attic space by 144.
  2. Divide the total above by 2.
  3. Divide total above by by 300.
  4. What is called the “net free” area you now know. The net free square inch area required for intake ventilation (for example at soffit) and the exhaust ventilation (for example the vents at the ridge as in the photos above).
  5. Divide the “net free” area by the ‘”net free'” area the Ventilation Product Manufacturer provides on the box. This will be your calculation for how many roof vents you need to install for correct attic ventilation.

Attic Solution – Keep the Heat Under Control With Proper Attic Ventilation!!!

Until Next Time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario

Industrial & Commercial Roof Waterproofing Solutions

Metal, Flat Roof or Waterproofing Problems?

General Roofing Systems Canada has been installing liquid rubber coatings on an increasing number of commercial and industrial applications lately.  It is the first time that a waterproofing product has come along that is truly predictable and highly effective. The development and use of liquid rubber coatings has solved several roofing and waterproofing related issues in both above and below grades in a very effective, predictable, and cost effective manner.

Liquid rubber coatings: liquid rubber coatings are made up of 100% solids, the coatings will not shrink as liquid rubber has superior adhesion that will bond to almost any construction material or substrate. They have elongations that exceed 350% and in some instances up to 1000% with a memory greater than 95%.

Liquid rubber is solvent free with no VOC’s and are compliant with all known environmental and OSHA requirements.  It can be used in confined spaces with-out respiratory equipment.

The coatings are resistant to thermal shock and will not crack in extreme cold, it will not slump or soften in extreme hot temperatures. Liquid rubber coatings can also be painted and are UV resistant.

Liquid coatings can be trowel , squeege , and spray applied.

Unlike urethanes, polyether-based liquid coatings and sealants will resist the damaging effects of sun (UV), rain, with both cold and hot temperature extremes.  Unlike silicones, polyether liquid rubber coatings are paintable and do not smell therefore enabling it to be used in confined spaces.

Here are just some of the commercial and industrial benefits of the liquid rubber coatings:

Metal Roofing and Flat Roofing: Liquid rubber is an excellent solution for metal and flat roofing. It is a hot rubberized asphalt mix that roofers have been installing on substrates such as concrete for decades, but what we are speaking of here is cold liquid rubber being applied. Liquid rubber is an excellent solution for flat roof restorations and metal roof problems.

The Liquid rubber coating is an excellent solution to all metal roof issues. The liquid rubbers traits help to resolve issues such as rust due to the rubbers excellent rust inhibitors. It is able to seal leaks without the roofs expansion or contractions being an issue due to the 350% – 1000% in elongation with a 95% memory. Liquid rubber has no VOC’s (100% VOC compliant) and is a true green roofing product. With a 10 year warranty extendable to 20 years on maintenance contract at 1/3 to 1/2 the cost of replacing a flat or metal roof, nothing comes close to life cycle costing of liquid rubber roofing.

Below Grade Waterproofing: Liquid rubber coatings can be used on almost any surface in any location that you may need waterproofing, including concrete. It can also be used on equipment wells, in between slab waterproofing, and other underground construction scenarios.

Pond Liners: Pond liners are typically applied with some form of rubber such as EPDM. It enables you to spray on the liquid rubber efficiently and with whatever level of thickness required. The American military sprays liquid rubber onto the containers that the troops drink from, if they use it for that then it is certainly good enough as a pond liner.

Eaves troughs – Gutters: Gutters can be coated on the inside to stop leaks.

Planter Boxes: There is nothing better than using liquid rubber to seal planter boxes. Liquid rubber waterproofing will help keep the water in the box.

Green Roofing Systems: Liquid rubber is ideal for green roofing as it is VOC free!

Plaza Decks: Plaza decks can be a difficult waterproofing scenario for facility managers due to the constant movement. Yet with the liquid rubber waterproofing it will outperform most applications. The movement of the structure no longer will be an issue with the elongation ability of the rubber.

Concrete and Asphalt Repairs: Sealing the cracks in concrete on asphalt is an ideal application for liquid rubber

Bulkhead Penetrations and Joints: Liquid rubber coatings will not shrink therefore it can be used in waterproofing bulkhead penetrations and joints.

Commercial and Industrial substrates and construction materials that liquid rubber can be applied to: ISO Insulation Board (such as flat roof ISO), Concrete, Steel, FRP, Drywall, Wood, Plywood, OSB, Asphalt, EPDM, TPO, PVC, EPS, SBS Modified Cap Sheet and SBS Base Sheet, Fiber, Board, Dens Deck, FRP (Fiber Reinforced Plastic), etc…

Liquid rubber elastomeric coating videos: 

 

liquid rubber for tar and gravel roofing repairs

A number of liquid rubber coating applications are demonstrated such as retaining walls, underground tanks, horse stables, water features, landscaping, asbestos encapsulation, below ground tanking, drainage dressing, power stations, tile adhesion, balconies, terraces, etc.

US roofing contractor applying liquid rubber to a flat roof – tar and gravel flat roof restoration process.

UK roofing contractor applying liquid rubber to metal roofing, rust, concrete, etc.

Liquid rubber coating being used to repair a tank.

Until next time,

The team at GRS.

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com.

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Roof Snow Removal Considerations

General Roofing Systems Canada provides roof repairs throughout Canada. Roof Repairs are completed in the following cities: Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Roofing, Roof Repair – Preventative Roof Maintenance Encouraged Before Winter Comes!

Fall has arrived and winter is just around the corner. This time of year is when people tend to be the most busy, with having just came back from vacation to children starting school and various other activities. With so much on the go for people, the last thing that you want to think about is the ROOF!

Yet the reality remains, this is also the busiest time for roofers, as facility managers and homeowners alike start to prepare the buildings for the harsh weather that winter brings. This is the best time to consider whether or not your roof has any current issues that need attending to.

snow and ice damming
Ice damming across a gutter system

The snow loads in Central Alberta and Northern Alberta were record setting. For many of the roof systems, if they did not fail or have issues last winter, it is almost certain they will have problems this winter.

We have  watched several commercial and industrial roofs completely fail in the Edmonton and Red Deer areas. The roofs literally buckled under the pressure from all the weight of the snow we received. Yet we believe this could have less severe had proper maintenance been taking place before the season hit.

This  winter has proven to be highly unusual. We experience such diversities in the climates all around western Canada. For example, in Vancouver our crews were busy with torrential rain, while in Saskatoon and Regina they were busy with snow falls, and in Calgary it was a constant cycle of  freeze and thaw. All this diverse weather  kept our roofing crews at complete capacity, often having to work many hours of overtime.

Some things to consider for your commercial, industrial, and residential roof maintenance prior to the next winter setting in;

Flat Roofing: Any flat roofing that took on heavy snow loads will most definitely require some attention. We highly recommend that owners heed the warnings from the previous season and at least asses the current quality of there roof, it would be best to have this assessment completed before the first snow fall. We have an annual roof repair and maintenance check list for flat roofing and the maintenance required to be completed listed on our website.


Metal Roofing: Metal roofing was hit the hardest last winter. The reason is that metal roof systems, especially commercial and industrial, had snow loads that compromised the metal roof panel seaming. In other words, the metal panels on the roof have been warped or pressed down so hard that the seams between the panels and the fasteners are compromised. The other issue we are seeing with industrial and commercial metal roofing this year is that many of the gutter systems are damaged.

The problem with metal roof systems on industrial buildings is that when the ice builds up in the gutter it will then back up and enter the building under the metal cladding. Fortunately, there are excellent solutions for metal roof issues yet most cases do require a full replacement.

Nowadays we can coat metal roofing with liquid rubbers. This is a elastomeric spray on roof coatings that will seal the metal roof seams, fasteners, and vents.

To learn more about how to solve metal roof leak problems search the topic on our blog at the top right corner. Simply type in your inquiry and our search engine will show results of the pages to help.

In addition to this, our main web site contains several pages on metal roofing, roof coatings, and roof repairs. You can find this information listed below with  the following links:

Residential Roofs: These systems did not have nearly as many structural  failures that occurred with Industrial and Commercial roofing last year. Although that is not saying that residential roofs, roof attic ventilation and condensation did not have their fair share of complications.  The reason being is that with the snow loads on roofs, the ice damming, condensation and ice backups in gutters, caused numerous problems.

As stated earlier, this winter season has been a treacherous one. Due to this fact, GRS would like to remind everyone to have an assessment completed on their roof for the next season BEFORE snow begins to fall.

Until next time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS).
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Drone Footage: Flat Roofing Raw Drone Video Footage

Flat Roofing Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. Alberta, Saskatchewan, British Columbia, Manitoba, Ontario. 

Drone Video Footage of a Commercial Flat Roofing Project Installing Fully Adhered EPDM Membrane.

This particular flat roof is 4.5 football fields in size. It is a tar and gravel flat roof on an industrial / commercial building that has a failed roof system. We are installing a fully adhered 60 mil EPDM flat roof system on the building.

In colder areas of Canada an EPDM or SBS Modified Torch-On flat roof system are preferred. In warmer areas such as Vancouver, downtown Toronto, or in warm areas of the USA reflective systems such as TPO, PVC or reflective roof coatings should be considered.

The advantage of using EPDM (especially fully adhered) in colder areas like Alberta, Saskatchewan, Manitoba, some parts of BC and Ontario is that EPDM expands and contracts very well with the change in temperatures. 2 Ply SBS Modified Bitumen Torch-On flat roofing is stronger for foot traffic (if your roof is going to have a lot of foot traffic) but it is not near as flexible as EPDM.

We recommend fully adhered EPDM over mechanically fastened EPDM membranes and loose-laid EPDM membrane roof assemblies. Loose-laid EPDM is much cheaper because the install time is shorter than with fully adhered (and the glue is expensive with fully adhered) but the disadvantage a loose-laid EPDM ballast system is maintenance costs in future. If you have to move the rock ballast to locate leaks in the future then this can be very costly.

For advice on various flat roof systems give us a call or email us anytime!

Until next time,

The Team at GRS

 

CONTACT US:
General Roofing Systems Canada (GRS).
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Flat Roofing Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

 

Roof Shake Maintenance, Repair, & Inspection

General Roofing Systems Canada provides maintenance, repair and inspection services for real wood roof shakes throughout Canada. Real wood roof shakes are installed in the following cities: Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Maintaining Your Real Wood Roof Shakes

Below this article has a listing of  links that will help assist you in a “do it yourself” shake roof cleaning and proper maintenance. We have also included options for roof repair and replacement. To experience the proper life-cycle of your roof, your real wood shake roofing require regular maintenance, inspection, and repair.

Roof Inspections

Should you experience any leaks, or see signs of splitting, curling or crumbling, it is advised to have an inspection completed. GRS provides thorough inspections that include complete documentation of the status of your roof. With our inspections you will receive accurate photos, cost estimates, and a detailed plan to maintain your roof properly. Shakes require regular upkeep in order to maintain 100% efficiency.

Even the roof flashing behind skylights, chimneys, and valleys require adequate maintenance. If not properly maintained, you may begin to see the metal rusting or the caulking around the metal roofing beginning to crust. If this continues to deteriorate, it is guaranteed that you will begin to have leaks.

Roof Repair

????????????????????????????????????

The repair of shake roofs is often more extensive than shingle or metal roofs. When the time comes to do significant repairs, be sure to get a detailed roof inspection done so that you can see everything that needs to be completed on your roof in advance. GRS’s roof reports are highly detailed and show photos of all the areas that require immediate concern.

Replacement of Cedar Roofing

Cedar roof replacement (or cedar roof conversions) offer more options for re-roofing. Real wood cedar offers a traditional, warm, and aesthetically pleasing roof on your home. There is also available different roofing materials that have a cedar roof look. Shake looking roof materials include Concrete Tile, Metal, Rubber, Steel Coated Shingles, Composite Plastic Tile, and more.

For More Information on real wood shake repairs and maintenance please feel free to look through the links listed below:

Shake Roofing Replacement – a page about the various options for real wood, metal, steel, rubber, concrete tile, and more.

Re-Roofing Options for Shake Roofinga page for various alternative options with detailed descriptions of different grades of real cedar roofing.

Real Wood Roofing Shake and Shingles – a page for re-roofing your home with real wood roofing.

Re-Roofing Shake to Asphalt Shingles a page explaining flashing considerations when going from a pine or cedar shake roof to asphalt shingles

Should you have any questions in regards to your cedar roof, please feel free to contact our office and one of our members will be happy to assist you.

Until next time,

The Team at GRS

CONTACT US:
General Roofing Systems Canada (GRS)
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.

Industrial Metal Roof Liquid Rubber Coating

General Roofing Systems Canada provides metal roof coatings throughout Canada. Roof Metal coatings in Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario

New Generation of Roof Coatings

With every new product or technique there is always some skepticism to be had among both technicians and buyers alike. Yet with the new elastomeric rubber roof coatings, this has proven to be a positive experience among all who use/receive it. Our crews have been quite satisfied with the coatings that are placed down on the metal and flat roof systems.

Roof Coatings for Restoration, Repair, Maintenance

Liquid rubber elastomeric polymer roof coatings have proven to be quite efficient in the field. When metal or flat roof systems need repair, this new generation of roof coatings is something that should be considered for your roof repair or restoration process.

Roof Coating Warranty and Guarantee

Our liquid rubber systems come with a 10 year, no hassle warranty from the manufacturer. Yet GRS is able to extend this guarantee for an additional 10 years, giving owners a full 20 year warranty. In addition to this, our lifetime workmanship guarantee would also be honoured, therefore providing a full lifetime warranty for the duration you own the building.

Roof Coating – Why does a Metal or Flat Roof Coated in Rubber work so well?

Roof systems expand and contract and buildings move. The secret to the new generation of roof coatings is the coating elongation (900% or more) – they are suited to cold Canadian winters and summers. The new coatings stretch and move with the metal or flat roof systems. They are monolithic (there are no openings or seams) and they stretch. Metal roofs can be quite difficult to repair; finding the source of the leaks can prove to be quite a frustrating experience for roofers, business owners and homeowners alike.

Metal Roof Fastener Gasket (rubber around screw)
Metal Roof Fastener Gasket (rubber around screw)

Metal roof seams, fastener holes, fastener gasket, flashing, vents, etc. can all move, and expand/contract. Seams between panels become larger, fastener holes become larger over time, the rubber gaskets on the screws deteriorate over time from UV, and flashing gives way to ice dams and expansion and contraction over time. The new roof coating is able to solve this problem by providing a 100% expansion rate to all surfaces.

Cost of Roof Coatings, Roof Replacements, and Roof Repairs

The cost to temporarily repair your roof (whether it is a flat roof or metal roof) is typically around 10% of the value of the roof (average over lifetime of roof). The cost to replace your metal or flat roof is roughly between 8.00 and 20.00 per square foot. Essentially a roof coating will only cost you half of what a full replacement would. Both coating and roof replacements have the same length of warranties. And should you choose to go with a roof coating it is tax deductible as it is considered maintenance.

Below are a number of pictures of a roof coating that is currently in progress:

100_0108
Roof Coating – Industrial Roof Restoration: Alberta. Liquid Rubber to metal roof.
100_0109
Roof Coating Crew on Metal Roof.
100_0110
The white company truck was black after this roof coating job
100_0111
Roof Coating just applied to metal roof – still setting up.
100_0112
Trowel grade liquid rubber hand applied to roof vents, flashing, etc. We also use mesh and seam tape to reinforce these areas.
100_0113
After trowel grade applied to openings, field of metal roof is coated.
100_0114
Liquid rubber trowled to roof vent
100_0118
OHS Compliance – Roofers must be in proper hard hats, steel toes, shirts, etc on all sites.
100_0119
So close to completing the roof coating and here comes the rain storm.
100_0120
Screws and metal roof seams are reinforced with trowel grade liquid coating.
100_0123 - Liquid Rubber Roof Coating
This photo clearly shows the difference between the original metal roof panel and the panel to left of it that has liquid rubber applied to it.
100_0122
First coat of roof coating applied
100_0124
The Roof Coating was excellent solution around windows on this low slope metal roof.
100_0125
Liquid rubber can be sprayed, rolled, brushed, trowel applied. One advantage this coating process has is that we can apply the liquid rubber up walls to areas where ice dams commonly cause leaks on industrial roofing.
100_0126
Industrial roof coating in progress.
Roof Coating - General Roofing 5
Roof vents, screws, seams, flashing, etc reinforced prior to roof coating being applied.
Roof Coating - General Roofing 8
Roof Coating rolled out onto the roof.
Roof Coating - General Roofing 10
GRS Crew working hard! This part of the metal roof was completed right before storm rolled in.
Roof Coating - General Roofing 9
Metal Roof Coating almost complete.

 

 For more information on Liquid Rubber Roof Coating, Repair, and Replacements; 

Search our blog and you will see results for various articles regarding roof repairs, coatings and replacements listed. You can also find more information at our main web page: http://www.grscanadainc.com/

Request a quotation for your roofing needs GRS will send a technician to  your site or home and prepare a roof report/quotation for your review.

Until next time,

The Roofers at GRS

CONTACT US:

General Roofing Systems Canada (GRS).
24 Hour Emergency Roof Repair: Call +1.877.497.3528 toll-free.

info@grscanadainc.com

Calgary, Red Deer, Edmonton, Fort McMurray, Lloydminster, Saskatoon, Regina, Medicine Hat, Lethbridge, Canmore, Banff, Cranbrook, Kelowna, Vancouver, Whistler, Winnipeg, Toronto and points between. British Columbia. Alberta. Saskatchewan. Manitoba. Ontario.